Skip to main content

Recording Modem Audio

Recording modem audio captures the acoustic signals and background noise present during a test, which is useful for troubleshooting and later analysis. In pshell, recordings are controlled with the recordstart and recordstop commands.

  1. Select the recording mode. Use 0 for passband recording or 1 for baseband recording:

    RecordMode 0
  2. Start recording. Specify a base filename and the file-segment duration in seconds:

    recordstart /captures/harbor_test 60

    The modem appends a timestamp and the .wav extension to the filename. The duration controls how frequently a continuous recording is divided into new files; it does not set the total recording time.

  3. Allow the recording to run for the required amount of time.

  4. Stop and close the recording:

    recordstop

Next: Now we'll download the recording from the modem and play it back.

Continue to Managing Recordings.