Skip to main content

Positioning Equipment for an Air Test

Acoustic energy transmitted from Modem 1 can propagate through the air for short distances and be received by Modem 2. Assuming multipath energy from sound reflections off the walls is not too damaging, this signal can be detected and demodulated.

Air test setup deckbox
Air test setup for Deckbox.

Guidelines​

  • Separate the two modems or Deckboxes by approximately 1 meter (3 feet).
  • Make sure acoustic reflections are minimized with sound-absorbing materials such as foam or cloth
  • Make sure there are no acoustic interferers in the room
  • Use a lower transmit-power setting in software when practical. Settings below ping 10 are generally preferred for air tests because they reduce excess acoustic energy and help limit multipath effects. Settings above ping 10 should be treated as high power for air testing.
  • If room multipath prevents detection, repositioning either the transmitter or receiver transducer can usually make reliable communication possible.

Next: Now that basic setup is complete, let's get started performing the air tests.

Continue to Air Test using Popoto Web UI or Air Test using Popoto pshell.