Skip to main content

Connection Interfaces

Popoto Modems can connect to an external device through serial, Ethernet, USB adapter, or product-specific board-level interfaces. The interfaces available on a given unit depend on the product family and ordered configuration.

Ethernet overall provides more options of interfacing (pshell or WebUI or SSH), so if, for example, someone was integrating a modem into a AUV, and they wanted a single interface, they may opt to using ethernet only, even if their primary way of controlling the modem was through pshell. Ethernet also is more responsive and less prone to errors in the case there is electrical noise or faulty wiring in a system. In the cases of the S-series modems, some are sold with ethernet-only interfaces or serial-only.

Ethernet
Availability

Available on most enclosed modems, Deckbox systems, with the exception of S-Series modems configured for serial, and OEM modem configurations with Ethernet exposed through the product interface.

Gigabit Ethernet

The PMM5544 and PMM6081 support Gigabit Ethernet.

Pros

Ethernet provides the highest-speed and most flexible host connection for Popoto command sockets, host APIs, real-time PCM capture, and software updates. Also allows for Web UI access, remote API calls, and PCM streaming.

Cons

Ethernet typically adds approximately 200-300 mW of power consumption. Standard copper Ethernet cable length is also limited to approximately 100 meters.

Notes

Connect to the modem IP address using telnet on port 17001 for a pshell-style command session, or use SSH to connect to the Debian Linux terminal.

Refer to Interface Control for the exact connector, pinout, voltage level, and cable details for the selected Popoto Modem.

Also see Choosing an Operation Mode.