Skip to main content

Gigabit Ethernet Expansion Interface

Overview​

The Gigabit Ethernet Expansion Interface provides the third and fourth differential pairs required to enable Gigabit Ethernet on the OEM modem. It is used together with the two Ethernet pairs on the PDI.

Early hardware revision

PMM6081 units manufactured before mid-2024 use a different Gigabit Ethernet expansion connector. Contact info@popotomodem.com for details when working with an early unit.

Electrical Connections​

All signal directions are relative to the OEM modem. Refer to the digital board connector locations figure for the connector's physical location.

PMM6081 Gigabit Ethernet expansion interface schematic
Gigabit Ethernet schematic connections.
Gigabit Ethernet Electrical Pinout
Pin NumberI/OPin NameNotes
4I/OENET_DP2_PT568A/T568B: blue
3I/OENET_DP2_NT568A/T568B: blue/white
2I/OENET_DP3_PT568A/T568B: brown/white
1I/OENET_DP3_NT568A/T568B: brown

Hardware Components​

The Gigabit Ethernet Expansion Interface uses a Molex PicoBlade connector, P/N 0510210400, or equivalent. The recommended contacts are Molex P/N 0500798000, suitable for 26–28 AWG wire. They can be crimped with Molex hand tool 2002181900; pre-crimped leads may also be used.

Molex PicoBlade four-position connectorMolex PicoBlade housing pin numbering
Gigabit Ethernet Interface User-Side Molex Connector.
Gigabit Ethernet Interface Components and Part Numbers
Part NumberManufacturerDescription
0510210400MolexPicoBlade 4-position connector receptacle, 1.25 mm pitch
0500798000MolexPicoBlade 26–28 AWG sockets
2002181900MolexPicoBlade hand crimp tool
2149202211MolexPre-crimped PicoBlade lead, 75 mm length

Mating Cable Notes​

  • The pinout is reversed relative to the PDI board to support pre-made Molex cables that connect A.pin1 to B.pin4, A.pin2 to B.pin3, and so on.
  • Use twisted-pair wiring, ideally with 100-ohm differential impedance, for pins 4/3 and 2/1.
  • Attach or detach the interface only while power is disconnected from the OEM modem to avoid electrical damage.