Flashing a New OS Image to a Popoto Modem's eMMC
This section explains how to flash the onboard eMMC on a Popoto modem using the WIC image included in the software release folder.
The exact image filename may change between releases. The WIC image filename includes a release timestamp, so use the files in the folder you received.
Flashing the modem overwrites all files on the eMMC. This includes network configuration, such as the modem IP address, and Popoto configuration and license files. Back up the files you need before flashing.
After flashing, the modem IP address resets to 10.0.0.238. The IP address can be changed with pshell over RS-422, or by connecting with Telnet:
telnet 10.0.0.238
Procedure Summary
The following is a high-level summary of the steps to flash a new OS image to a Popoto modem's eMMC. Refer to the topics in this section for details on each step.
-
Install required tools.
If not already installed, install NXP Universal Update Utility (uuu) and LZ4 extraction software on the Linux computer.
-
Prepare for flashing.
Backup the modem's Popoto configuration and license files to your local computer, extract the OS release folder, and decompress the .wic.lz4 image.
-
Prepare the modem.
Set the modem's DIP switches to flashing mode, apply power, and connect the USB Micro-B cable.
-
Flash the eMMC.
Run the
uuucommand and wait for the flash to complete successfully. -
Reboot the modem.
Disconnect the modem, return the DIP switches to boot mode, restart the modem, and restore the configuration and license files.
-
Restore files.
Copy the backed-up Popoto configuration and license files back to the modem.