Requirements
You will need:
Hardware
- A Linux, MAC OS, or Windows development computer
- A USB Micro-B or USB-C cable
- Which you'll need depends on your modem's hardware revision. Check the port on the modem's main processing board.
- A power supply for the modem
Software
- A Mereswin OS release folder containing:
- A u-boot bootloader image - imx-boot-pmm-emmc.bin-flash_evk
- A root filesystem image - pmm-image-pmm-[timestamp].rootfs.wic
- NXP Universal Update Utility (uuu)
- LZ4 extraction software
If you do not yet have UUU or an LZ4 extraction program, the next page will guide you through installation of both tools.