Skip to main content

Installing Required Tools

UUU

The primary tool we will use is the NXP Universal Update Utility (UUU). Select an OS below to see install instructions for your system.

Linux

On Debian/Ubuntu-based systems, install the required USB library:

sudo apt update
sudo apt install libusb-1.0-0-dev

Download the latest Linux uuu binary from the NXP MFG Tools releases page. Then make it executable and move it to a directory in your PATH:

chmod a+x uuu
sudo mv uuu /usr/local/bin/
Windows
  1. Download the latest uuu.exe from the NXP MFG Tools releases page. Rename the file to uuu.exe if the downloaded filename includes a version number.
  2. Create C:\Tools\uuu and move uuu.exe into it.
  3. Add C:\Tools\uuu to the Windows Path environment variable. Alternatively, run uuu.exe using its full path.

Windows 10 and 11 should install the USB driver automatically when the modem is connected in serial download mode. If Windows does not recognize the modem, follow the manual WinUSB driver instructions in the NXP UUU Installation Guide.

LZ4

The other tool we will use is LZ4, which decompresses the downloaded firmware image so it is ready to flash. Select an OS below to see install instructions for your system.

Linux

On Debian/Ubuntu-based systems, install LZ4 with:

sudo apt update
sudo apt install lz4
Windows
  1. Download the latest Windows 64-bit ZIP file from the official LZ4 releases page.
  2. Extract the ZIP file.
  3. Create C:\Tools\lz4 and move lz4.exe into it.
  4. Add C:\Tools\lz4 to the Windows Path environment variable. Alternatively, run lz4.exe using its full path.