About Payloads
About PSK Payload Packets
Each PSK payload packet consists of three parts:
- The acquisition sequence
- The header
- An optional payload
The acquisition sequence does not change for different data rates. The header is always sent in 80 bps frequency-hopping mode and contains information such as:
- Transmitter ID
- Intended receiver ID (255 is the broadcast ID)
- Transmit power
- Whether a payload follows
- Payload length
- Payload modulation scheme
An example PSK payload packet is shown in the following figure:

Payload Modulation Schemes
To configure the modulation rate of the payload portion of the waveform, use the PayloadMode variable.
The modulation schemes are shown in the following table:
| PayloadMode | Modulation scheme |
|---|---|
| 0 | FH-FSK, 80 bps |
| 1 | QPSK, 5120 bps |
| 2 | QPSK, 2560 bps |
| 3 | QPSK, 1920 bps |
| 4 | QPSK, 1280 bps |
| 5 | QPSK, 10240 bps, convolutional coding disabled |
| 6 | BPSK, 2560 bps |
| 7 | BPSK, 1280 bps |
| 8 | BPSK, 960 bps |
| 9 | BPSK, 640 bps |