Recording Use Case - Test Modulation Scheme
One example of using the recording capabilities of the Popoto system is to test a custom modulation scheme on Popoto underwater acoustic modems.
The following streamlined procedure allows you to efficiently test and evaluate your custom modulation schemes
-
Generate Waveform:
Create the desired waveform using software like MATLAB.
-
Load Waveform:
Transfer the waveform to the modem's
/capturesdirectory. You can do this using the Recordings page in the Popoto Web Interface. Refer to the Managing Audio Recordings section for detailed instructions. -
Deploy and Test Environment:
Deploy two modems in an aquatic channel. Use the Popoto Web Interface to analyze the spectrogram to assess noise and interference within the chosen frequency band. Refer to the Spectrogram Analysis section for detailed instructions.
-
Record Signal:
On one modem, start a recording using the pshell
recordstartcommand or the Record Start button in the Popoto Web Interface. -
Playback Signal:
On the second modem, initiate playback of the recorded signal from the second modem using the pshell
playstartcommand or with the Play button in the Popoto Web Interface. -
Monitor Signal:
Continuously monitor the received signal on the Popoto Web Interface's spectrogram.
-
Stop Recording:
Once playback is complete, stop the recording using the pshell
recordstopcommand or the Stop Recording button in the Popoto Web Interface. The recorded waveform is automatically saved to the/capturesdirectory. -
Download Recordings:
Download the recorded waveforms using SCP or the Popoto Web Interface Recordings page.
-
Offline Analysis:
Analyze the downloaded waveforms using scripts, assess noise and interference, and attempt demodulation.
For details refer to:
For parameter details, refer to Popoto JSON Variables.