Skip to main content

Hardware Components

The Power Input Interface uses a Molex Micro-Fit 3.0 connector, P/N 0436450200, or equivalent. The recommended contacts are Molex P/N 0462355001. These gold-plated, low-insertion-force contacts are rated for 250 mating cycles and are suitable for 20–24 AWG wire.

The contacts can be crimped with a Molex hand tool such as 0638190000. Pre-crimped wires are also available from suppliers such as DigiKey.

Molex Micro-Fit 3.0 two-position connectorMolex Micro-Fit single-row connector pin numbering
Power Input Interface user-side Molex connector.
Power Input Interface Components and Part Numbers
Part NumberManufacturerDescription
0436450200MolexMicro-Fit 3.0 2-position connector receptacle, 3.0 mm pitch
0462355001MolexMicro-Fit 3.0 20–24 AWG gold-plated, lubricated sockets
0638190000MolexMicro-Fit 3.0 hand crimp tool
2147611215MolexPre-crimped Micro-Fit 3.0 lead, 450 mm length