Skip to main content

6-Pin Interface (Mid-2025 and Earlier)

Connector revision

OEM modems manufactured before mid-2025 use a 6-pin connector. For the 3-pin version, refer to 3-Pin Interface (Mid-2025 and Later).

note

The illustration in the analog board connector locations figure in the Interface Control Overview shows the 3-pin version.

6-Pin Transducer Interface Electrical Pinout​

6-Pin Transducer Interface Electrical Pinout
Pin NumberI/OPin NameNotes
1OTR_OUTTR node
2OTRANSDUCER_OUT_PTransducer output
3OAMP_OUTInternal amplifier node
4P/IGND/TRANSDUCER2Board ground or second transducer input
5OAMP_OUTInternal amplifier node
6PGNDBoard ground

Guidelines​

  • Connect the transducer between pins 2 and 6.
  • Pins 1 and 3 are normally shorted with a jumper. A series matching element may instead be inserted between them; contact Popoto Modem for details.
  • A parallel matching element may be inserted between pins 5 and 4; contact Popoto Modem for details.
  • For a second receive-only transducer, contact info@popotomodem.com. By default, pin 4 is identical to pin 6 and connected to board ground.

6-Pin Transducer Interface Hardware Components​

The 6-pin interface uses a Molex Mini-Fit Jr. connector, P/N 0039013065, or equivalent. The recommended contacts are Molex P/N 0039000074, suitable for 18–24 AWG wire. They can be crimped with Molex hand tool 0638190901; pre-crimped leads may also be used.

Pin-number orientation

The pinout in the following figure matches the analog-board pinout but does not match the orientation shown in Molex drawing 0039013065.

Molex Mini-Fit Jr. six-position connectorPMM6081 six-position transducer connector pin numbering
6-Pin Transducer Interface User-Side Molex Connector.

6-Pin Transducer Interface Components and Part Numbers​

6-Pin Transducer Interface Components and Part Numbers
Part NumberManufacturerDescription
0039013065MolexMini-Fit Jr. 6-position connector receptacle, 4.2 mm pitch
0039000074MolexMini-Fit Jr. 18–24 AWG gold-plated sockets
0638190901MolexMini-Fit Jr. hand crimp tool
2153431215MolexPre-crimped Mini-Fit Jr. lead, 450 mm length