Analog Line Output Interface
Overview
The Analog Line Output Interface provides an analog signal from the transmitter pathway.
Electrical Connections
The transmitter pathway contains a two-channel stereo DAC. The left channel drives the Transducer Interface and the right channel drives the Analog Line Output Interface. The line output is single-ended and DC-coupled, with a minimum supported load of 32 Ω and a full-scale output of 1.58 V RMS.
Refer to the analog board connector locations figure for the connector's physical location.

| Pin Number | I/O | Pin Name | Notes |
|---|---|---|---|
1, SMA center | O | LINE_OUT | Analog line output |
2–5, SMA shell | P | GND | Board ground |
Hardware Components
The Analog Line Output Interface accepts any standard SMA cable. One example is TE Connectivity P/N CSE-SGAM-305-SGAM.